Calibrated for Ceramill®
Motion Ecosystem.
Standard 98mm geometry with precision-milled 10mm step. Engineered to minimize spindle load on Ceramill Motion 2, Mikro, and Matik units.
Geometric Interface Specifications
| Dimension Parameter | ValidTi Specification | Tolerance Class |
|---|---|---|
| Outer Diameter | 98.5mm | h9 |
| Step Height | 10.0mm | Standard AG |
| Step Width | 1.5mm | ±0.05mm |
| Planar Parallelism | < 0.02mm | High Precision |
NOTE: Verification of holder calibration is recommended prior to milling Grade 5 Titanium.
Holder Vibration & Spindle Wear
The Failure Mode: Imperfect step geometry causes micro-vibrations in the Ceramill holder during high-torque roughing strategies. This leads to premature bur failure and visible 'chatter marks' on the bridge surface.
The ValidTi Protocol: Our discs undergo 100% optical sorting for step concentricity. By ensuring a locking fit within the 10mm step interface, we transfer torque efficiently, protecting the spindle bearings from harmonic oscillation.
Validated Material Applications for Medical Processing
- Long-span Implant Bridges (All-on-X)
- Custom Abutments (Hybrid)
- Primary Bars
- Screw-Retained Crowns
- Jewelry / Body Modification
- Industrial Prototyping
- Hobbyist Milling